Application

Aeration for industrial effluent

Short answer

Industrial effluent tanks use floating aerators to supply oxygen for biological treatment, keep solids in suspension, cool hot effluent and strip dissolved gases such as hydrogen sulfide and methane. The units install without emptying the tank or stopping the process.

Last updated

What can surface aeration do for industrial effluent?

  • Supply oxygen for biological treatment
  • Mix the tank so solids do not settle
  • Cool hot effluent through spray contact with the air
  • Strip dissolved gases such as hydrogen sulfide and methane

Which aerator type suits industrial tanks?

High speed floating aerators suit tanks with a changing level. Directional aerator mixers suit buffer tanks and channels where spray must be kept low. Low speed surface aerators suit tanks that need a lot of mixing per kW.

Sized for your tank

Send the tank size, depth and what flows in. We reply with questions or a written proposal.

Send an enquiry

Frequently asked questions

Can a surface aerator cool effluent?

Yes. Throwing water into the air in a spray releases heat, so high speed surface aerators are also used to cool hot effluent.

Send an enquiry

New units, supplied and installed across Ireland. Sold by enquiry.

  1. Tell us about the tankSize, depth, what flows in and what your licence asks for. A rough figure is enough to start.
  2. Sizing and proposalA written proposal with unit sizes, the working behind them and the running cost.
  3. Supply and installUnits go into the working tank on anchored moorings. No emptying, no concrete works.
  4. Handover and warrantyWe commission the units with you and hand over the manufacturer warranty and documents.

Or call 087 473 6464 or email [email protected]

We use your details only to reply. No cookies, no mailing list.

Send an enquiryCall