Guide

What types of surface aerator are there?

Short answer

There are four main types: high speed floating aerators (direct drive, for tanks with a changing level), low speed surface aerators (gearbox and large turbine), aerator mixers (air drawn down a shaft, aeration and mixing in one) and directional aerator mixers (a current with little spray).

Last updated

High speed floating aerators

Direct drive, 750 to 1,800 rpm, on a float. Lower cost and they follow the water level, so they are a common choice for treatment tanks and basins.

Low speed surface aerators

A large turbine turned slowly through a gearbox. They pump far more water per kW and suit activated sludge tanks and oxidation ditches, at a higher purchase cost.

Aerator mixers

A propeller draws air down a shaft and drives it into the water. One unit aerates and mixes, and some can switch to mixing only for anoxic zones.

Directional aerator mixers

Push a strong current one way with little noise and no spray, for buffer tanks, channels and sites near neighbours.

Sized for your tank

Send the tank size, depth and what flows in. We reply with questions or a written proposal.

Send an enquiry

Frequently asked questions

High speed or low speed surface aerator?

High speed floating units cost less and suit tanks whose level changes. Low speed units move more water per kW and suit activated sludge tanks and oxidation ditches.

Send an enquiry

New units, supplied and installed across Ireland. Sold by enquiry.

  1. Tell us about the tankSize, depth, what flows in and what your licence asks for. A rough figure is enough to start.
  2. Sizing and proposalA written proposal with unit sizes, the working behind them and the running cost.
  3. Supply and installUnits go into the working tank on anchored moorings. No emptying, no concrete works.
  4. Handover and warrantyWe commission the units with you and hand over the manufacturer warranty and documents.

Or call 087 473 6464 or email [email protected]

We use your details only to reply. No cookies, no mailing list.

Send an enquiryCall